Metalwork - Exam Papers - OL - Paper - 2005

(a) This screw can be turned using a(n): Allen Key
Open Spanner
Adjustable Spanner
Ring Spanner
(b) One complete turn of the Thimble will move the Spindle: 0.01 mm
0.11 mm
0.10 mm
1.00 mm
(c) This is a: Taper Tap
Split Die
Tap Wrench
Plug Tap
(d) These plates were joined by: Brazing
Soldering
Bolting
Riveting
(e) This tool is a: Bench Vice
Hand Vice
Toolmaker's Clamp
Pin Vice
(f) A lathe toolholder is held in a: Tailstock
Chuck
Toolpost
Headstock
(g) This instrument is a(n): Inside Callipers
Vernier Callipers
Outside Callipers
Odd-Leg Callipers
(h) Part ‘X’ is called the: Body
Flute
Shank
Flank
(i) Brass used for brazing is called: Solder
Flux
Silver Solder
Spelter
(j) Part ‘X’ is called a: Vice Clamps
Vice Grips
Jaw Face
Fixed Jaw
(k) This technique is called: Drilling
Counterboring
Reaming
Countersinking
(l) This fastener is a: Bolt
Grub Screw
Thumb Screw
Lock Nut