|
|
|
Metalwork - Exam Papers - OL - Project - 2003
Instructions
Details of a Model Aeroplane are shown on the accompanying drawings.
1. MAke and assemble the project using the materials specified in the Parts List.
2. Assemble Parts 4 and 5 and push into Part 2. This allows access to batteries.
3. Design, make and attach a Support for the Tail Wheel.
4. Complete the electric circuit and test with 2 x 1.5V AA batteries.
Parts List
| Part No. |
Part Name |
Required |
Material and Description |
| 1 |
WING |
1 |
ALUMINIUM, COPPER OR BRASS |
| 2 |
FUSELAGE |
1 |
ALUMINIUM, COPPER OR BRASS |
| 3 |
UNDERCARRIAGE |
1 |
ALUMINIUM, COPPER OR BRASS |
| 4 |
TAIL WING |
1 |
ALUMINIUM, COPPER OR BRASS |
| 5 |
TAIL FIN |
1 |
ALUMINIUM, COPPER OR BRASS |
| 6 |
TAIL WHEEL |
1 |
ALUMINIUM OR NYLON |
| 7 |
WHEELS |
1 |
ALUMINIUM OR NYLON |
As Supplied
| Part No. |
Part Name |
Required |
Material and Description |
| 8 |
SWITCH |
1 |
AS SUPPLIED (Ø5MM) |
| 9 |
AA BATTERY HOLDER |
1 |
AS SUPPLIED |
| 10 |
MOTOR |
1 |
1.5V - 3V Ø24X27 |
| 11 |
PROPELLOR |
1 |
AS SUPPLIED |
| 12 |
INSULATED WIRE |
AS REQUIRED |
AS SUPPLIED |
| 13 |
Ø3.2 POP-RIVET |
3 |
ALUMINIUM |
| 14 |
M3X12 SET SCREW |
5 |
BRASS OR STEEL |
| 15 |
M3 HEX NUT |
3 |
BRASS OR STEEL |
| 16 |
M3 LOCKNUT |
3 |
STEEL |
Design Element
| Part No. |
Part Name |
Required |
Material and Description |
| 17 |
TAIL WHEEL SUPPORT |
1 |
AS DESIGNED |
Zip Files
Download Solidworks Parts, Solidworks Drawings, PDFs of Drawings. 3D images.
|
|
|
